AUSTIN, Texas – (BUSINESS WIRE) – FlexRadio Systems will partner with BAE Systems under a multi-year contract with the US Air Force to provide software defined high frequency (HF) radiotelephones for the High Frequency Airborne Radio Upgrade Program (AHFRM). .
The new HF radio will provide safe, out of sight communication over long distances for aircraft crews in an increasingly complex and crowded threat environment.
“Combining FlexRadio’s unique software-defined expertise in IP and HF radios with BAE Systems’ extensive knowledge and expertise in advanced C4ISR solutions helped to quickly deliver a rugged solution that supports strategic and tactical missions,” said Stephen Hicks, chief technology officer. and vice president of engineering for FlexRadio Systems.
“High-frequency communication around the world is what our commercial customers do every day, using virtually every mode of operation and type of propagation,” said Matt Youngblood, CEO of FlexRadio. “FlexRadio’s contribution to the AHFRM program will help ensure the future capabilities of the fighters for the years to come.”
FlexRadio Systems is a leader in technologically advanced software defined radio systems for the consumer, commercial and government markets. Founded in 2003, FlexRadio has customers in more than 30 countries with a wide range of products including consumer HF radio systems, government geolocation sensors and signal intelligence platforms. FlexRadio Systems is based in Austin, Texas. For more information, visit www.flexradio.com.
What are the limitations of SDR?
Disadvantages of SDR technology
- A / D converters limit the highest frequencies that the digital section can use. This may interest you : Safeguarding Compromised Cell Phones From Pegasus Spyware.
- For very simple two-way radios, the basic platform can be too expensive.
- Developing software-defined radio requires both hardware and software skills.
Can you broadcast in SDR? The possibility of transmission. There are half-duplex SDRs, which means you can send or receive simultaneously, but not both. This can be a hindrance if you want to simultaneously intercept your signal and transmit a modified version of your signal.
What are the challenges in implementation of SDR?
SDR also presents many challenges, but some of them cause SDR to evolve more slowly than predicted. See the article : Edinburgh’s Celestia UK names Malachy Devlin as new CEO. Transceiver development challenges range from size, weight and power issues such as computing power required to software architecture challenges such as waveform application portability.
What are the architecture goals of SDR?
Control of general radio functionality, implementation of radio waveforms, showing the scalability of computing resources by connecting multiple processing nodes and controlling them by SCA.
What are the components of SDR?
The value of the SDR is based on a basket of five currencies – the US dollar, the euro, the Chinese renminbi, the Japanese yen and the British pound sterling.
What is the need of SDR?
SDR performs much of the signal processing in a general-purpose computer or reconfigurable digital electronics component. To see also : MediaTek Announces Kompanio 900T to Enhance Computing Experiences for Tablets and Notebooks – Technuter. The goal of this project is to produce a radio that can receive and transmit a new form of radio protocol by simply running new software.
What are the user applications of SDR?
These applications include the integration of wireless medical devices with a common communication platform for seamless interoperability, and cognitive radio (CR) for body area networks (BANs) and wireless sensor networks (WSNs) for monitoring the medical environment.
What is SDR device?
Software Defined Radio (SDR) is a radio communication system that uses reconfigurable software-based components to process and convert digital signals. Unlike traditional radio communication systems, these radio devices are very flexible and versatile.
Where are flex radios manufactured?
FlexRadio is a product made in the USA.
What is a flex radio? FlexRadio was the first to introduce a true SDR transceiver to the amateur community that allows you to upgrade your radio’s personality, functionality and performance through a simple software download.
Is Flex FM on DAB?
What frequency does Flex FM operate on? In the world of multi-platform radio, with DAB, FM, HD Radio and Online Radio, there are many different ways to tune in, whether you want to listen in the car, on the bus, or at home.
What frequency is Flex FM? Flex FM is a local radio station based in London that originally started life as a pirate radio station. Flex broadcasts house, drum and bass, dubstep, UK garage, old skool hardcore, reggae and soul to London and the surrounding area on 101.4FM.
Is digital FM a DAB?
DAB stands for Digital Audio Broadcasting and uses a digital signal instead of the traditional analog frequency modulation – FM – signal. FM can be susceptible to interference from adjacent channels, which limits the number of radio stations available.
What is digital FM?
The digital FM radio can provide clear sound comparable to the quality of CDs, and the digital AM radio can provide sound quality equivalent to that of standard analog FM radio. Digital FM radio also enables broadcasters to offer additional audio channels to the public using their existing FM frequency. Data services.
Is DAB the same as digital?
DAB uses exactly the same transmitters and broadcast technology as DAB, it just converts the sound to digital in a different way, so to receive DAB stations you must have a DAB capable radio.
Is DAB and FM the same?
DAB uses higher frequencies than FM and therefore more transmitters may need to be compensated to achieve the same range as a single FM transmitter. DAB is usually broadcast by a company other than the broadcaster, which then sells the capacity to several radio stations.
Can you get FM on a DAB radio?
In addition, most DAB radios also have an FM mode, so this option is always there if you need it.
What is a DAB FM antenna?
This combined DAB-FM F omnidirectional radio antenna is intended for simultaneous or individual reception of FM (analogue radio) and DAB (Digital Audio Broadcasting) signals. The antenna is equipped with a single coaxial cable connector, carrying both FM and DAB signals, which can be output later (at the headend, in a wall socket, etc.).
Is DAB radio same as FM?
DAB uses higher frequencies than FM and therefore more transmitters may need to be compensated to achieve the same range as a single FM transmitter. DAB is usually broadcast by a company other than the broadcaster, which then sells the capacity to several radio stations.
Can I use FM antenna for DAB?
Yes. Many existing FM antennas are spiral wound. The spiral-wound antenna is short and squat and is usually mounted on the roof. It is most often fitted to newer models and is used to amplify the FM signal, so it may not work effectively with a DAB radio.
Is FM the same as DAB?
DAB provides lower sound quality than FM. Switching to digital radio should not lead to listeners receiving their favorite stations with lower sound quality, therefore stations must switch to using DAB before turning off any FM station.
Can I use FM antenna for DAB?
Yes. Many existing FM antennas are spiral wound. The spiral-wound antenna is short and squat and is usually mounted on the roof. It is most often fitted to newer models and is used to amplify the FM signal, so it may not work effectively with a DAB radio.
Which is best DAB or FM?
Which is better, FM or DAB? A: DAB. Digital radio is better than FM because it has more channels to choose from, has a more reliable signal, and is accessible over greater distances.
How does SDR radio work?
A Software Defined Radio System (SDR) is a radio communication system that uses software to modulate and demodulate radio signals. SDR performs much of the signal processing in a general-purpose computer or reconfigurable digital electronics component.
Does SDR require the Internet? RTL-SDR is a very cheap dongle that can be used as a computer radio scanner to receive live radio signals in a specific area, also no internet connectivity required.
Can you transmit with an SDR?
SDR transceivers are capable of both transmitting and receiving radio signals.
Can you scan with an SDR?
SDR can do things that no hardware scanner can do. Greg used his SDR to tune smart utility water and gas meters to track its usage.
Can you transmit with HackRF?
HackRF One is a half-duplex transceiver. That is, it can transmit or receive, but not both.
Is SDR console free?
SDR-Console V3 is the latest line of free SDR-Console software packages from developed by Simon Brown.
Is SDRSharp free? SDR # (SDRSharp) version 1855 (2022-03-26) – The best free SDR software for Airspy and RTL-SDR dongles! Airspa drivers. HackRF driver. USRP driver.
Is SDR Uno free?
Previously known as Studio1, it was expensive high-end SDR software, then SDRPlay acquired Studio 1. SDRuno is completely free and RTL-SDR compatible.
Is SDRuno free?
That is set to change today as SDRplay announced the release of its SDRuno software, the free general purpose radio program for RSP. SDRuno is an adapted version of Studio1 software that SDRplay acquired the rights to in April last year.
How do I download SDRuno?
When you go to https://sdrplay.com/downloads/ and select SDRuno (all RSPs), you will be given the choice between the already existing stable version 1.33 and the new version 1.4 Release Candidate 1.
Is SDR open source?
Also, being a fully open-source platform (software and hardware), schematics and code are readily available for all your hacking needs.
Is LimeSDR open source?
LimeSDR is a low-cost, open source, application-enabled (more on that later) software-defined radio (SDR) platform that can be used to support almost any wireless communication standard.
Is GNU Radio free?
GNU Radio is a free software development toolkit that provides signal processing blocks to implement software defined radio and signal processing systems. It can be used with external RF equipment to create software-defined or non-hardware radiotelephones in a simulation-like environment.
Which open source software is available for SDR demo?
Gqrx is an open source programmable radio receiver (SDR), supported by GNU Radio and the Qt graphical toolkit. Gqrx supports many SDR hardware available, including Airspy devices, Funcube Dongles, rtl-sdr, HackRF and USRP.
Comments are closed.